JOJOFEIFEI Black high-waist bootcut leggings from the product catalog

JOJOFEIFEI vs. Alo Bootcut Leggings: Fabric, Sizing and Price

Choosing between JOJOFEIFEI LEG004 and Alo's Airbrush High-Waist Bootcut Legging? Both offer a high-waisted, flared-leg look, but their published fabric blends, size ranges and length information are different. Start with those differences before deciding how much to spend.

This comparison is by JOJOFEIFEI Editorial and uses the products' published information. It is not a matched wear test or a claim that LEG004 is made from Alo's Airbrush fabric.

Compare the exact products, not the whole brands

US product details checked November 2, 2026
Detail JOJOFEIFEI High-Waist Bootcut Flare Leggings, LEG004 Alo Airbrush High-Waist Bootcut Legging, Regular, Black
Displayed item price $27.50 $128
Listed fabric blend 70% nylon, 30% spandex 87% nylon, 13% elastane
Size range shown XS–L XXS–XL, labeled across US 00–18
Length information Size-specific outseam; no verified inseam in the reviewed chart 32-inch inseam for the Regular product compared here
Waist and shape High waistband; fitted hips and a leg widening from the knee High waist, wide waistband and bootcut shape
Care instructions Cold gentle wash with similar colors; low tumble dry or hang dry Machine wash inside out on cold; air dry

Sources: JOJOFEIFEI's LEG004 listing and Alo's official Regular Black product page. Prices are item prices before applicable shipping and tax. Check your selected size and current terms before buying; shown size choices do not promise stock. No extra JOJOFEIFEI discount is added to the selling price above.

Black high-waist bootcut leggings shown from the front in the JOJOFEIFEI product catalog.
JOJOFEIFEI LEG004 in Black. This catalog view illustrates its silhouette, not a side-by-side fabric or fit test with Alo.

The length comparison has an important limit

Alo's 32-inch inseam describes the inside leg of the Regular version. LEG004's chart lists the outside length: 105.4 cm for XS, 106.7 cm for S, 108 cm for M and 109.2 cm for L. These are different measurements. Converting the centimeters to inches would not make them directly comparable.

If you know you need a specific inseam, Alo provides a product-specific starting point here. For LEG004, compare the outseam with the same measurement on a pair you own, or obtain the required inseam information before deciding. Do not infer the answer from the model's proportions or buy a larger size only to gain length.

Our size-selection guide explains the difference between garment and body measurements. The shoe and hem guide helps you plan the final clearance with your own footwear.

Different percentages do not establish a performance winner

Spandex and elastane are names for the same fiber category, but the two listed blends differ. A larger percentage does not, by itself, establish greater compression, better recovery or a softer hand feel. Knit construction, weight, finishing and fit also affect the experience.

Airbrush is Alo's named fabric offering. If you already like that specific product, do not assume another bootcut legging will duplicate it. If you want to evaluate a lower-priced option with a similar broad silhouette, LEG004 is a different product to assess on its own chart and care information.

Which belongs on your shortlist?

  • Consider LEG004 when the $27.50 item price meets your budget and the available XS–L garment dimensions match what you need.
  • Consider Alo's Regular Airbrush when you specifically want its fabric offering, its verified 32-inch inseam, or an option within its broader displayed size range.
  • Do not choose either on price alone when length, body fit or an important performance requirement is unresolved. Compare current return terms and the full order total, too.

A lower purchase price is useful only if the garment works for your wardrobe. Review LEG004's current chart and color options, then make the choice on measurements and preferences rather than a “same quality” promise.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.